





MRO124W
ROCKET / AC / 120CM
El ventilador de techo ROCKET tiene un diámetro de 1220mm, adecuado para lugares con un tamaño 15/20m2. Muy silencioso, lo que lo hace ideal para dormitorios. Excelente flujo de aire (8,400m3/hora) y enfriamiento natural. Cuatro aspas livianas de ABS que consumen menos energía. Referente al motor, consta de 3 velocidades (60W/28W/16W). Garantía de 7 años en el hogar, siempre y cuando sea instalado por un electricista profesional.
119.00 €
| Blanco
+
1
-
Precio total: 150€

Ahorro de energia

Reversible verano/invierno

Anclaje seguro

Control de pared

Motor AC

Silencioso
Características
keyboard_arrow_up- Cuerpo de metal y palas de ABS de diseño aerodinámico.
- Muy silencioso, ideal para dormitorios
- Función verano/invierno
- Motor AC con rodamiento de bolas de larga duración
- Anclaje seguro para techos inclinados
- Aspas de ABS de última generación
Dimensiones

Incluye
NADA
Instalación
Debe ser instalado por un profesional
Envío
Especificaciones
keyboard_arrow_upNOMBRE | ROCKET |
REFERENCIA | MRO124W |
POTENCIA | 60W |
VELOCIDADES | 3 |
MOTOR | AC |
MATERIAL | Abs |
CAUDAL DE AIRE | 8.900m3/hr |
CONTROLADOR | De pared |
MEDIDAS | 1200mm |
NÚMERO DE ASPAS | 4 |
REVERSIBLE VERANO/INVIERNO | Sí |
ANCLAJE SEGURO | Sí |
LOCALIZACIÓN | Interiores |
VOLTAJE | 220-240V~AC |
FREQUENCIA | 50Hz |
GARANTÍA | 3 años |
How Does Ripple Control Affect LED Lights?
A flickering LED light is the most common complaint arising from ripple control, which is generated when usually but not only when the light is dimmed and the ripple control frequency is in the line, usually between 300Hz and 1300Hz. The Flickr is often, but not always, intermittent depending on when the ripple control signals are being transmitted. It is normally at certain times i.e. 6 pm and then again at 8:30 pm and will only last for 30 seconds to 2 minutes, and when the power company stops sending the signal the flicker stops. People often notice it most acutely in the night when off-peak hot water systems are turned on. ALL brands of LED drivers are affected by these ripple control signals.
Why Doesn’t Martec have Ripple Control Filters in their LED Drivers?
Ripple control is not the norm and in many environments. While Martec does sympathise with the few customers who do experience a problem, it is not cost effective to build an Electronic Driver that rejects all ripple control frequencies given the small proportion of people affected, a cost that would have to ultimately be borne by all customers.
Cambios y devoluciones gratis
Envíos 24/48H.
Envíos gratis a partir de 49,90€