MLBF60345W

PANTALLA LED TRICOLOR BLADE 20W

Esta pantalla lineal LED tricolor de 20W presenta unos acabados de gran calidad, bajo consumo de energía, así como un difusor de policarbonato. Esta luminaria lineal LED es ideal para usar en casas y garajes.

24.90 €

| Blanco

+

1

-

Precio total: 150€

Ahorro de energia

Ahorro de energia

Tricolor CCT

Tricolor CCT

IP20

IP20

SMD LED

SMD LED

Características

keyboard_arrow_up
  • LED tricolor conmutable 3000K, 4000K o 5000K
  • Resistencia: IP20
  • Diseño de bajo perfil
  • Proporciona una excelente distribución de la luz con la tecnología LED Tricolor SMD.
  • Lente antideslumbrante
  • Baja producción de calor
  • Sistema de conexión rápida para una instalación rápida y fácil

Dimensiones

dimensions

Incluye

Instalación

Debe ser instalado por un profesional

Envío

Especificaciones

keyboard_arrow_up
NOMBRE PANTALLA LED TRICOLOR BLADE 20W
REFERENCIA MLBF60345W
POTENCIA 20W
MATERIAL Cuerpo de aluminio y difusor opal de policarbonato
CONEXIÓN FÁCIL
MEDIDAS 600mm
VOLTAJE 220-240V
FREQUENCIA 50Hz
GARANTÍA 2 años
ILUNMINACION 20W SMD
LUMENS 2000LM
TEMPERATURA Tricolor (3000K,4000K,5000K)
DIMMABLE No
CRI ≥80
Ángulo de apertura 120
Tipo de Led SMD
Resistencia IP20
Vida útil +30.000
How Does Ripple Control Affect LED Lights?

A flickering LED light is the most common complaint arising from ripple control, which is generated when usually but not only when the light is dimmed and the ripple control frequency is in the line, usually between 300Hz and 1300Hz. The Flickr is often, but not always, intermittent depending on when the ripple control signals are being transmitted. It is normally at certain times i.e. 6 pm and then again at 8:30 pm and will only last for 30 seconds to 2 minutes, and when the power company stops sending the signal the flicker stops. People often notice it most acutely in the night when off-peak hot water systems are turned on. ALL brands of LED drivers are affected by these ripple control signals.

Why Doesn’t Martec have Ripple Control Filters in their LED Drivers?

Ripple control is not the norm and in many environments. While Martec does sympathise with the few customers who do experience a problem, it is not cost effective to build an Electronic Driver that rejects all ripple control frequencies given the small proportion of people affected, a cost that would have to ultimately be borne by all customers.

Cambios y devoluciones gratis

Envíos 24/48H.

Envíos gratis a partir de 49,90€