MMDC1033WN

MINI MALLORCA LED BLANCO MATE/NATURAL / DC / 106CM / (WIFI)

La gama Mini Mallorca DC de 1066mm ofrece un acabado de alta calidad. Cuenta con un eficiente y silencioso motor DC de 8 velocidades (4w | 7w | 12w| 18w | 24w| 32w) regulables a través del mando a distancia. Ofrece una luminaria LED SMD de 20W con temperatura seleccionable (2700k, 3000k, 4000k, 5000k, 6000k) y luz dimmable.

0.00 €

| Blanco

+

1

-

Ahorro de energia

Ahorro de energia

Dimmable

Dimmable

Tricolor CCT

Tricolor CCT

Reversible verano/invierno

Reversible verano/invierno

Anclaje seguro

Anclaje seguro

Zonas costeras

Zonas costeras

Motor DC

Motor DC

Características

keyboard_arrow_up
  • Muy silencioso, ideal para dormitorios
  • Función verano/invierno
  • La última tecnología y diseño de ventiladores de techo
  • Dimmable
  • Motor DC de bajo consumo
  • Aspas de ABS de última generación
  • Totalmente reversible para uso en verano e invierno.
  • Mando a distancia universal de ventilador de techo de radiofrecuencia con el diseño de conexión rápida fácil de Martec.

Dimensiones

dimensions

Incluye

Mando a distancia

Instalación

Debe ser instalado por un profesional

Envío

Especificaciones

keyboard_arrow_up
NOMBRE MINI MALLORCA LED BLANCO MATE/NATURAL / DC / 106CM / (WIFI)
REFERENCIA MMDC1033WN
POTENCIA 4w | 7w | 12w| 18w | 24w| 32w
VELOCIDADES 8
Motor DC
MATERIAL Cuerpo y aspas de ABS
CAUDAL DE AIRE 8,540m3/hr
CONTROLADOR Mando a Distancia + WIFI (Tuya)
CONEXIÓN FÁCIL
MEDIDAS 1066mm (42”)
NÚMERO DE ASPAS 3
REVERSIBLE VERANO/INVIERNO
ANCLAJE SEGURO
Ubicación Interiores y exteriores cubiertos
Voltaje 220-240Va.c.
Frecuencia 50-60Hz
Garantía 20 años (solo motor)
Iluminación 20W LED
Lúmenes Hasta 2120lm
Temperatura 2700K / 3000K / 4000K / 5000K / 6000K
Regulable 1-10
CRI 85-90
Tipo de Led LED SMD
Vida útil 35,000 hrs @ Ta25°C
How Does Ripple Control Affect LED Lights?

A flickering LED light is the most common complaint arising from ripple control, which is generated when usually but not only when the light is dimmed and the ripple control frequency is in the line, usually between 300Hz and 1300Hz. The Flickr is often, but not always, intermittent depending on when the ripple control signals are being transmitted. It is normally at certain times i.e. 6 pm and then again at 8:30 pm and will only last for 30 seconds to 2 minutes, and when the power company stops sending the signal the flicker stops. People often notice it most acutely in the night when off-peak hot water systems are turned on. ALL brands of LED drivers are affected by these ripple control signals.

Why Doesn’t Martec have Ripple Control Filters in their LED Drivers?

Ripple control is not the norm and in many environments. While Martec does sympathise with the few customers who do experience a problem, it is not cost effective to build an Electronic Driver that rejects all ripple control frequencies given the small proportion of people affected, a cost that would have to ultimately be borne by all customers.

Cambios y devoluciones gratis

Envíos 24/48H.

Envíos gratis a partir de 49,90€