FSLDC124WR

LINK BLANCO / DC / 122CM

El Ventilador de techo Link es un modelo ultra silencioso del fabricante australiano Martec. Dispone de un diámetro de 122cm con hasta 5 velocidades controlables a través del mando a distancia que viene incluido de serie. Se trata de un modelo completamente en blanco que destaca por su gran relación calidad-precio. Ventilación de calidad con motor DC, mando a distancia con temporizador y de un tamaño ideal para cualquier dormitorio estándar (122cm). Se le puede agregar una barra de extensión de 90cm en caso de techos altos.

299.00 €

| Blanco

+

1

-

Mando a distancia de 5 -velocidades

Mando a distancia de 5 -velocidades

Reversible verano/invierno

Reversible verano/invierno

Anclaje seguro

Anclaje seguro

Plywood

Plywood

Motor DC

Motor DC

35W DC

35W DC

Silencioso

Silencioso

Características

keyboard_arrow_up
  • Muy silencioso, ideal para dormitorios
  • Función verano/invierno
  • Anclaje seguro para techos inclinados
  • Motor DC de bajo consumo
  • Conexión rápida
  • Mando a distancia de 5 velocidades con función de temporizador de hasta 8 horas (1h, 2h, 4h, 8h)
  • Potente y eficiente motor de DC de 35 W
  • La última tecnología y diseño de ventiladores de techo

Dimensiones

dimensions

Incluye

NADA

Instalación

Debe ser instalado por un profesional

Envío

Especificaciones

keyboard_arrow_up
NOMBRE LINK
REFERENCIA FSLDC124WR
POTENCIA 30w | 22w | 15w | 9w | 4w
VELOCIDADES 5
Motor DC
MATERIAL Cuerpo de aluminio y aspas de plywood
CAUDAL DE AIRE 9,800m3/h
CONTROLADOR Mando a distancia
CONEXIÓN FÁCIL
MEDIDAS 1220mm
NÚMERO DE ASPAS 4
REVERSIBLE VERANO/INVIERNO
ANCLAJE SEGURO
Ubicación Interiores
Voltaje 220-240V~AC
Frecuencia 50Hz
Garantía 10 años
How Does Ripple Control Affect LED Lights?

A flickering LED light is the most common complaint arising from ripple control, which is generated when usually but not only when the light is dimmed and the ripple control frequency is in the line, usually between 300Hz and 1300Hz. The Flickr is often, but not always, intermittent depending on when the ripple control signals are being transmitted. It is normally at certain times i.e. 6 pm and then again at 8:30 pm and will only last for 30 seconds to 2 minutes, and when the power company stops sending the signal the flicker stops. People often notice it most acutely in the night when off-peak hot water systems are turned on. ALL brands of LED drivers are affected by these ripple control signals.

Why Doesn’t Martec have Ripple Control Filters in their LED Drivers?

Ripple control is not the norm and in many environments. While Martec does sympathise with the few customers who do experience a problem, it is not cost effective to build an Electronic Driver that rejects all ripple control frequencies given the small proportion of people affected, a cost that would have to ultimately be borne by all customers.

Cambios y devoluciones gratis

Envíos 24/48H.

Envíos gratis a partir de 49,90€