MLXF3451M

FORTRESS APLIQUE LED DE ALUMINIO PARA EXTERIORES NEGRO

Moderno aplique de aluminio y LED Tricolor de 15W & 1250lm. Gracias a su grado de protección IP54, el aplique de pared LED es perfecto para su instalación en patios, balcones, terrazas y jardines, ya que está diseñado para funcionar a la intemperie. Disponible en blanco

39.90 €

| Negro

+

1

-

Precio total: 150€

Ahorro de energia

Ahorro de energia

Tricolor CCT

Tricolor CCT

+25.000

+25.000

Características

keyboard_arrow_up
  • Seleccione la configuración de temperatura de color de luz 3000k, 4000k o 5000k
  • Resistente al vandalismo IK08 clasificado
  • Ideal para uso comercial o residencial.
  • IP54 resistente a la intemperie
  • Construcción de aluminio
  • Sistema de conexión rápida para una instalación rápida y fácil

Dimensiones

dimensions

Incluye

Instalación

Debe ser instalado por un profesional

Envío

Especificaciones

keyboard_arrow_up
NOMBRE FORTRESS APLIQUE LED DE ALUMINIO PARA EXTERIORES NEGRO
REFERENCIA MLXF3451M
POTENCIA 15W
MATERIAL Aluminio
CONEXIÓN FÁCIL
MEDIDAS Base ø 117mm x L 187mm x H 166mm
LOCALIZACIÓN Exteriores
VOLTAJE 220-240V
FREQUENCIA 50Hz
GARANTÍA 2 años
ILUNMINACION 15W COB
LUMENS 1200lm
TEMPERATURA Tricolor (3000K,4000K,5000K)
CRI ≥80
Ángulo de apertura 100
Tipo de Led COB
Resistencia IP54
Vida útil +25.000
How Does Ripple Control Affect LED Lights?

A flickering LED light is the most common complaint arising from ripple control, which is generated when usually but not only when the light is dimmed and the ripple control frequency is in the line, usually between 300Hz and 1300Hz. The Flickr is often, but not always, intermittent depending on when the ripple control signals are being transmitted. It is normally at certain times i.e. 6 pm and then again at 8:30 pm and will only last for 30 seconds to 2 minutes, and when the power company stops sending the signal the flicker stops. People often notice it most acutely in the night when off-peak hot water systems are turned on. ALL brands of LED drivers are affected by these ripple control signals.

Why Doesn’t Martec have Ripple Control Filters in their LED Drivers?

Ripple control is not the norm and in many environments. While Martec does sympathise with the few customers who do experience a problem, it is not cost effective to build an Electronic Driver that rejects all ripple control frequencies given the small proportion of people affected, a cost that would have to ultimately be borne by all customers.

Cambios y devoluciones gratis

Envíos 24/48H.

Envíos gratis a partir de 49,90€