B132FO

FORMENTERA / DC / 132CM

Formentera DC es un ventilador de techo DC de 132 cm. Garantiza 6 velocidades con un funcionamiento totalmente silencioso. De diseño moderno, cuenta con un cuerpo de acero y aspas de madera natural. (35,6w | 23w | 16w | 8w | 9,5w| 7,5 w | 5,6 w).

0.00 €

| Negro

+

1

-

Ahorro de energia

Ahorro de energia

Reversible verano/invierno

Reversible verano/invierno

Anclaje seguro

Anclaje seguro

Mando a distancia de 6 velocidades

Mando a distancia de 6 velocidades

Exteriores cubiertos

Exteriores cubiertos

Motor DC

Motor DC

Silencioso

Silencioso

Características

keyboard_arrow_up
  • Muy silencioso, ideal para dormitorios
  • Función verano/invierno
  • La última tecnología y diseño de ventiladores de techo
  • Motor DC de bajo consumo
  • Potente y eficiente motor de DC de 35 W
  • La conexión rápida permite que nuestros controles remotos se instalen fácilmente en minutos.

Dimensiones

dimensions

Incluye

Mando a distancia

Instalación

Debe ser instalado por un profesional

Envío

Especificaciones

keyboard_arrow_up
NOMBRE FORMENTERA
REFERENCIA B132FO
POTENCIA 35,6w | 23w | 16w | 8w | 9,5w| 7,5 w | 5,6 w
VELOCIDADES 6
Motor DC
MATERIAL Cuerpo de aluminio y aspas de madera
CAUDAL DE AIRE 12,200m³/hr
CONTROLADOR Mando a distancia
CONEXIÓN FÁCIL
MEDIDAS 132cm
NÚMERO DE ASPAS 3
REVERSIBLE VERANO/INVIERNO
ANCLAJE SEGURO
Ubicación Interiores
Voltaje 220-240V~AC
Frecuencia 50Hz
Garantía 10 años
How Does Ripple Control Affect LED Lights?

A flickering LED light is the most common complaint arising from ripple control, which is generated when usually but not only when the light is dimmed and the ripple control frequency is in the line, usually between 300Hz and 1300Hz. The Flickr is often, but not always, intermittent depending on when the ripple control signals are being transmitted. It is normally at certain times i.e. 6 pm and then again at 8:30 pm and will only last for 30 seconds to 2 minutes, and when the power company stops sending the signal the flicker stops. People often notice it most acutely in the night when off-peak hot water systems are turned on. ALL brands of LED drivers are affected by these ripple control signals.

Why Doesn’t Martec have Ripple Control Filters in their LED Drivers?

Ripple control is not the norm and in many environments. While Martec does sympathise with the few customers who do experience a problem, it is not cost effective to build an Electronic Driver that rejects all ripple control frequencies given the small proportion of people affected, a cost that would have to ultimately be borne by all customers.

Cambios y devoluciones gratis

Envíos 24/48H.

Envíos gratis a partir de 49,90€