MFF1333WS

FLUSH LED BLANCO / AC / 127CM

La gama Flush de 1270mm es ideal para techos bajos. Cuenta con un eficiente y silencioso motor de 3 velocidades (55w | 34w | 16w) regulables a través del mando a distancia. Ofrece una luminaria LED SMD de 18W con temperatura seleccionable (3000k, 4000k, 5000k) y luz dimmable.

279.90 €

| Blanco

+

1

-

Ahorro de energia

Ahorro de energia

Dimmable

Dimmable

Tricolor CCT

Tricolor CCT

Reversible verano/invierno

Reversible verano/invierno

Exteriores cubiertos

Exteriores cubiertos

Motor AC

Motor AC

Características

keyboard_arrow_up
  • Cuerpo de metal y palas de ABS de diseño aerodinámico.
  • Muy silencioso, ideal para dormitorios
  • No se oxida y es anticorrosivo, lo que lo hace adecuado para uso en interiores / exteriores cubiertos
  • Función verano/invierno
  • Motor AC con rodamiento de bolas de larga duración
  • Anclaje seguro para techos inclinados
  • Para los modelos con luz incluye 15 W y 1300 lúmenes SMD LED tricolor 3000k, 4000k, 5000k

Dimensiones

dimensions

Incluye

NADA

Instalación

Debe ser instalado por un profesional

Envío

Especificaciones

keyboard_arrow_up
NOMBRE FLUSH
REFERENCIA MFF1333WS
POTENCIA 55w | 34w | 16w
VELOCIDADES 3
Motor AC
MATERIAL Cuerpo de aluminio y aspas de ABS
CAUDAL DE AIRE 9.900m3/hr
CONTROLADOR Mando a distancia
CONEXIÓN FÁCIL
MEDIDAS 1270mm
NÚMERO DE ASPAS 3
REVERSIBLE VERANO/INVIERNO
ANCLAJE SEGURO
Ubicación Interiores y exteriores cubiertos
Voltaje 220-240V~AC
Frecuencia 50Hz
Garantía 20 años (solo motor)
Iluminación 15W
Lúmenes 1450lm / 1650lm / 1600lm
Temperatura 3000K / 4000K / 5000K
Regulable
CRI ≥80
Tipo de Led SMD
Vida útil 35,000 hrs @ Ta25°C
How Does Ripple Control Affect LED Lights?

A flickering LED light is the most common complaint arising from ripple control, which is generated when usually but not only when the light is dimmed and the ripple control frequency is in the line, usually between 300Hz and 1300Hz. The Flickr is often, but not always, intermittent depending on when the ripple control signals are being transmitted. It is normally at certain times i.e. 6 pm and then again at 8:30 pm and will only last for 30 seconds to 2 minutes, and when the power company stops sending the signal the flicker stops. People often notice it most acutely in the night when off-peak hot water systems are turned on. ALL brands of LED drivers are affected by these ripple control signals.

Why Doesn’t Martec have Ripple Control Filters in their LED Drivers?

Ripple control is not the norm and in many environments. While Martec does sympathise with the few customers who do experience a problem, it is not cost effective to build an Electronic Driver that rejects all ripple control frequencies given the small proportion of people affected, a cost that would have to ultimately be borne by all customers.

Cambios y devoluciones gratis

Envíos 24/48H.

Envíos gratis a partir de 49,90€