TLEO34528WD

ECLIPSE: PLAFON DE TECHO LED REDONDO DE 28W SMD PARA EXTERIORES

Eclipse II se ha diseñado de manera excelente con los más altos estándares, por lo que son ideales para uso comercial o residencial. La gama está disponible en una luz LED tricolor SMD de 15W, 18W o 28W que está cubierta con un difusor acrílico opal endurecido, proporciona una excelente distribución de la luz. Perfecto para uso comercial, Eclipse II presenta una cubierta de lente segura y antivandálica con cerradura. La luz LED conmutable viene en 3000k, 4000k o 5000k y es regulable al 10% con un atenuador de borde posterior.

59.90 €

| Blanco

+

1

-

Precio total: 150€

Ahorro de energia

Ahorro de energia

Dimmable

Dimmable

Tricolor CCT

Tricolor CCT

+25.000

+25.000

SMD LED

SMD LED

Características

keyboard_arrow_up
  • Dimmable
  • Garantía de 3 años
  • Proporciona una excelente distribución de la luz con la tecnología LED Tricolor SMD.
  • Seleccione la configuración de temperatura de color de luz 3000k, 4000k o 5000k
  • Resistente al vandalismo IK08 clasificado
  • IP54 resistente a la intemperie

Dimensiones

dimensions

Incluye

Instalación

Debe ser instalado por un profesional

Envío

Especificaciones

keyboard_arrow_up
NOMBRE ECLIPSE: PLAFON DE TECHO LED REDONDO DE 28W SMD PARA EXTERIORES
REFERENCIA TLEO34528WD
POTENCIA 28W
MATERIAL Difusor acrílico endurecido
CONEXIÓN FÁCIL
MEDIDAS 320mm x 54mm
LOCALIZACIÓN Interiores y exteriores cubiertos
VOLTAJE 220-240V
FREQUENCIA 50-60Hz
GARANTÍA 2 años
ILUNMINACION 28W SMD LED
LUMENS 2300lm
TEMPERATURA Tricolor (3000K,4000K,5000K)
DIMMABLE
CRI ≥80
Ángulo de apertura 110
Tipo de Led SMD
Resistencia IP54
Vida útil +25.000
How Does Ripple Control Affect LED Lights?

A flickering LED light is the most common complaint arising from ripple control, which is generated when usually but not only when the light is dimmed and the ripple control frequency is in the line, usually between 300Hz and 1300Hz. The Flickr is often, but not always, intermittent depending on when the ripple control signals are being transmitted. It is normally at certain times i.e. 6 pm and then again at 8:30 pm and will only last for 30 seconds to 2 minutes, and when the power company stops sending the signal the flicker stops. People often notice it most acutely in the night when off-peak hot water systems are turned on. ALL brands of LED drivers are affected by these ripple control signals.

Why Doesn’t Martec have Ripple Control Filters in their LED Drivers?

Ripple control is not the norm and in many environments. While Martec does sympathise with the few customers who do experience a problem, it is not cost effective to build an Electronic Driver that rejects all ripple control frequencies given the small proportion of people affected, a cost that would have to ultimately be borne by all customers.

Cambios y devoluciones gratis

Envíos 24/48H.

Envíos gratis a partir de 49,90€