MLXD3451M

DEFENDER: APLIQUE LED PARA EXTERIORES DEFENDER NEGRO

Moderno aplique de pared LED Tricolor de 10W & 1000lm. Gracias a su grado de protección IP54, el aplique de pared LED es perfecto para su instalación en patios, balcones, terrazas y jardines, ya que está diseñado para funcionar a la intemperie. Disponible en blanco.

24.90 €

| Negro

+

1

-

Precio total: 150€

Ahorro de energia

Ahorro de energia

ABS antioxidable

ABS antioxidable

CCT

CCT

Ángulo de apertura

Ángulo de apertura

+25.000

+25.000

Características

keyboard_arrow_up
  • Seleccione la configuración de temperatura de color de luz 3000k, 4000k o 6500k
  • Ideal para uso comercial o residencial.
  • Resistente al vandalismo con cubierta de lente segura bloqueable
  • IP54 resistente a la intemperie
  • Tecnología LED de ahorro de energía de larga duración.
  • Cabezal ajustable vertical y horizontal
  • Sistema de conexión rápida para una instalación rápida y fácil

Dimensiones

dimensions

Incluye

Instalación

Debe ser instalado por un profesional

Envío

Especificaciones

keyboard_arrow_up
NOMBRE APLIQUE LED PARA EXTERIORES DEFENDER
REFERENCIA MLXD3451M
POTENCIA 10W
MATERIAL ABS
CONEXIÓN FÁCIL
MEDIDAS Base ø 106mm x L 168mm
LOCALIZACIÓN Exteriores
VOLTAJE 220-240V
FREQUENCIA 50Hz
GARANTÍA 2 años
ILUNMINACION 10W COB LED
LUMENS 1000lm
TEMPERATURA Tricolor (3000K,4000K,5000K)
CRI ≥80
Ángulo de apertura 100
Tipo de Led COB
Resistencia IP54
Vida útil +25.000
How Does Ripple Control Affect LED Lights?

A flickering LED light is the most common complaint arising from ripple control, which is generated when usually but not only when the light is dimmed and the ripple control frequency is in the line, usually between 300Hz and 1300Hz. The Flickr is often, but not always, intermittent depending on when the ripple control signals are being transmitted. It is normally at certain times i.e. 6 pm and then again at 8:30 pm and will only last for 30 seconds to 2 minutes, and when the power company stops sending the signal the flicker stops. People often notice it most acutely in the night when off-peak hot water systems are turned on. ALL brands of LED drivers are affected by these ripple control signals.

Why Doesn’t Martec have Ripple Control Filters in their LED Drivers?

Ripple control is not the norm and in many environments. While Martec does sympathise with the few customers who do experience a problem, it is not cost effective to build an Electronic Driver that rejects all ripple control frequencies given the small proportion of people affected, a cost that would have to ultimately be borne by all customers.

Cambios y devoluciones gratis

Envíos 24/48H.

Envíos gratis a partir de 49,90€