TLBD34510WD

BLITZ FOCO EMPOTRABLE DOWNLIGHT LED TRICOLOR DE 13W

Luminaria LED SMD de 13W excelente para cualquier hogar que busque dar el paso hacia la iluminación rentable y energética.Proporciona una luz intensa con multitud de posibilidades (3000K,4000K y 5000K). Cuerpo de aluminio con un disipador de PVC. La excelente calidad de los materiales le otorgan un factor de protección IP44.

14.50 €

| Blanco

+

1

-

Precio total: 150€

Ahorro de energia

Ahorro de energia

Dimmable

Dimmable

Tricolor CCT

Tricolor CCT

IC-4

IC-4

+25.000

+25.000

SMD LED

SMD LED

Características

keyboard_arrow_up
  • Dimmable
  • Garantía de 3 años
  • Resistencia: IP44
  • Proporciona una excelente distribución de la luz con la tecnología LED Tricolor SMD.
  • Seleccione la configuración de temperatura de color de luz 3000k, 4000k o 5000k
  • Construcción de aluminio

Dimensiones

dimensions

Incluye

Instalación

Debe ser instalado por un profesional

Envío

Especificaciones

keyboard_arrow_up
NOMBRE BLITZ FOCO EMPOTRBLE DOWNLIGHT LED TRICOLOR DE 13W
REFERENCIA TLBD34510WD
POTENCIA 13W
MATERIAL Aluminio
MEDIDAS 110mm x 32,5mm
LOCALIZACIÓN Interiores
VOLTAJE 220-240V
FREQUENCIA 50-60Hz
GARANTÍA 3 años
ILUNMINACION 13W SMD
LUMENS 970lm
TEMPERATURA Tricolor (3000K,4000K,5000K)
DIMMABLE
CRI ≥80
Ángulo de apertura 100
Tipo de Led SMD
Resistencia IP44
IC-4 IC-4
Vida útil +50.000
How Does Ripple Control Affect LED Lights?

A flickering LED light is the most common complaint arising from ripple control, which is generated when usually but not only when the light is dimmed and the ripple control frequency is in the line, usually between 300Hz and 1300Hz. The Flickr is often, but not always, intermittent depending on when the ripple control signals are being transmitted. It is normally at certain times i.e. 6 pm and then again at 8:30 pm and will only last for 30 seconds to 2 minutes, and when the power company stops sending the signal the flicker stops. People often notice it most acutely in the night when off-peak hot water systems are turned on. ALL brands of LED drivers are affected by these ripple control signals.

Why Doesn’t Martec have Ripple Control Filters in their LED Drivers?

Ripple control is not the norm and in many environments. While Martec does sympathise with the few customers who do experience a problem, it is not cost effective to build an Electronic Driver that rejects all ripple control frequencies given the small proportion of people affected, a cost that would have to ultimately be borne by all customers.

Cambios y devoluciones gratis

Envíos 24/48H.

Envíos gratis a partir de 49,90€