CFW124CR

ALPHA / AC / 122CM

La serie Alpha es sencilla pero básica y extremadamente funcional. El ventilador se presenta en un acabado blanco acabados de color simplista y moderno. Dispone de un diámetro de 122cm con 4 aspas y un motor muy eficiente de 60W (AC).

139.00 €

| Blanco

+

1

-

Reversible verano/invierno

Reversible verano/invierno

Control remoto adaptable

Control remoto adaptable

Plywood

Plywood

Motor AC

Motor AC

Anclaje seguro

Anclaje seguro

Silencioso

Silencioso

Características

keyboard_arrow_up
  • Cuerpo de metal y palas de ABS de diseño aerodinámico.
  • Función verano/invierno
  • Motor AC con rodamiento de bolas de larga duración
  • Anclaje seguro para techos inclinados
  • La conexión rápida permite que nuestros controles remotos se instalen fácilmente en minutos.

Dimensiones

dimensions

Incluye

NADA

Instalación

Debe ser instalado por un profesional

Envío

Especificaciones

keyboard_arrow_up
NOMBRE ALPHA
REFERENCIA CFW124CR
POTENCIA 60w | 29w | 15w
VELOCIDADES 3
Motor AC
MATERIAL Cuerpo de aluminio y aspas de plywood
CAUDAL DE AIRE 8.900m³/hr
CONTROLADOR Mando a distancia
CONEXIÓN FÁCIL
MEDIDAS 122cm
NÚMERO DE ASPAS 4
REVERSIBLE VERANO/INVIERNO
ANCLAJE SEGURO
Ubicación Interiores y exteriores cubiertos
Voltaje 220-240V~AC
Frecuencia 50Hz
Garantía 10 años
Iluminación 18W
Lúmenes 1880lm / 2120lm / 2020lm
Temperatura 3000K / 4000K / 5000K
Regulable
CRI ≥80
Ángulo de apertura -
Tipo de Led SMD
How Does Ripple Control Affect LED Lights?

A flickering LED light is the most common complaint arising from ripple control, which is generated when usually but not only when the light is dimmed and the ripple control frequency is in the line, usually between 300Hz and 1300Hz. The Flickr is often, but not always, intermittent depending on when the ripple control signals are being transmitted. It is normally at certain times i.e. 6 pm and then again at 8:30 pm and will only last for 30 seconds to 2 minutes, and when the power company stops sending the signal the flicker stops. People often notice it most acutely in the night when off-peak hot water systems are turned on. ALL brands of LED drivers are affected by these ripple control signals.

Why Doesn’t Martec have Ripple Control Filters in their LED Drivers?

Ripple control is not the norm and in many environments. While Martec does sympathise with the few customers who do experience a problem, it is not cost effective to build an Electronic Driver that rejects all ripple control frequencies given the small proportion of people affected, a cost that would have to ultimately be borne by all customers.

Cambios y devoluciones gratis

Envíos 24/48H.

Envíos gratis a partir de 49,90€